M2VT-700
2-Column Hi-Speed VMC





  • Along with X and Y axis, Z axis is also designed without any overhang to eusure superb accuracy over the entire range of travel.
  • Heaving-duty roller bearing linear guideways with 1.77 inch rail width has large contact surface between silding roller block and rail.
  • X axis and Z axis are independent from working table,and Z axis will move with X axial.The couble column provide more stable quality during machining.
  • Axis rapid feed rate, 118/118/118 ft/min,provide high working efficiency.


Armless type ATC
Standard with 16 tools


  • Motor direct-coupled spindle rotates up to 12,000 rpm, with torque directly transmitted through the shaft coupling,which ensure low inertia but keeps high efficiient machining performance.
  • Precision ceramic bearings of high rigidity and low thermal expansion are deployed to optimized beaning supports.
  • Low run-out and low thermal deformation are thus obtained at the spindle nose.

Travel

X/Y/Z travel 27.55/20.07/16.14 in)
Spindle nose to table surface 5.9~22 in

Table

Table size 31.49 x 20.07
T slot(NO./W/Dist) 18 x 15Tx 3.93 in
Max.tableload 1,102 lbs

Spindle

Speed 12,000rpm
Taper CAT-40(Opt.BT40/DIN40/HSKA40)
Transmission Direct drive

Motor

Spindle motor(kw) 10.19/14.95 HP

Feed Rate

Rapid feed 118/118/118 ft/min
Cutting feed rate 3.28~65.6 ft/min
3 axis slide way Roller type linear guide way on 3 axes

Control

CNC control system Fanuc/Mitsubishi

Air & Power Supply

Air source 71.16~99.56 psi

ATC

Max. tool length 11.8 in
Max. tool weight 13.22 lbs

General

Machine weight (approx.) 12786.8 lbs
Machine dimensions (LxWxH) 103.5 x 71 x 110.62 in

The builder reserves the rights to modify the design, specifications, ect. to improve the performance of machines when necessary.

  • The enlarged roller bearing linear motion guides perform extreme rigidity.
  • The gantry machine frame of rigid dual wall castings ensures low vibration performance in high speed machining, and results in the utmost surface finishing on works, and better tool service life.
  • The symmetrical box-head stock design assures cutting rigidity while Z-axis is moving rapidly.
  • Direct-drive spindle deploys high precision large ceramic-ball type hybrid bearings to get less thermal expansion coefficient and low vibration.
  • Rigid & steady column employs dual and thick walls design to offer excellent rigidity and it assures perfect cutting accuracy for long period time of using.
  • X Axis linear guides are fixed at high-low tracks allocation with optimized span design to get perfectly integrated combination rigidity during movement and cutting.