Travel

X/Y/Z	900/520/510 mm (35.43/20.47/20 inch)
A axis (tilting)	+30° ~ 120°
C axis (rotating)	360°
Max. C axis dia.	∅ 415.74 in
Max. A axis speed	25 rpm
Max. C axis speed	25 rpm
Spindle nose to table surface	30-540 mm (1.19"-21.25")
Spindle center to column front	958 mm (37.71")

Table

Table size	∅ 12.598 in
T slot size	0.472 in
Max.tableload	100 kg (220.2 lbs )

Spindle

Spindle nose to work table surface	30~540mm (1.19"~22.25")
Spindle center to column front	958mm (37.71")
Front bearings dia	70mm (2.8")
Speed	Belt type 8,000 rpm
Taper	BT40 (opt.CAT40, DIN40)

Feed Rate

X/Y/Z rapid feed rate	1889.76/1889.76/125.98 in/min Opt. 1417.32/1417.32/1259.84 in/min
X/Y/Z cutting feed rate	393.7 in/min (294 rpm)
Z axis counter balance	Without
Ball screw dia. & pitch	∅1.574in, P0.629/0.629/10.472 in (Opt. P0.472/0.472/0.472 in)
Guide way	Linear guide way 9.251/1.771/41.771 in

ATC

Tool capacity	24T
Max. tool dia . (w/ adjacent tool)	75 mm (2.95")
Max . tool dia. (w/o adjacent tool)	125 mm (4.92")
Max . tool length	300 mm (11.81")
Max . tool weight	7 kg /120 kg (17.6 lbs /264.2 lbs)

General

Machine weight	6650 Kgs (14647 lbs)
Machine dimension (WxDxH)	2800 x 2405 x 2800 mm (110.2" x 94.6" x 110.2")

The builder reserves the rights to modify the design, specifications, ect. to improve the performance of machines when necessary.

• All major parts are built with high tensile meehanite FC30 casting alloy provides outstanding wear-resistance and rigidity.
• High precision D40 mm, C3 class ball-screw with double nut pre-tension design on all three axes to enhance axis rigidity and accuracy stability .
  *Extra widened separated guide ways design on base
• Counter weightless design, upgraded direct driven Z axis motor provide the best reaction on high speed movement.
• Three axes adapts linear guide ways : X /Y /Z :25 /45/45 mm. Z axis equipped with extra length carriage to enhance stability